Hey, no offense, however your Swim Spa Cover smells bad. Possibly you’ve gotten used to it?
Don’t worry, it occurs to all spa owners at some time or another; water is one of nature’s most erosive compounds. Moisture permeates in and ends up being trapped between the outer vinyl shell and the plastic wrapped foam cores. The warm, wet environment is perfect for mold and mildew and other kinds of stinky stuff.
If wetness has permeated even more into the cling wrap foam core, the cover ends up being waterlogged, which can rapidly grow all sorts of dark and foul-smelling slime, but likewise make the cover really difficult to eliminate, and not as efficient at keeping the heat in the spa. Time for a much better kind of Swim Spa Cover
Smelly Swim Spa Cover?!?
• Broken or harmed. Split foam cores, ripped or used spots, torn seams. A Swim Spa Cover that loses it’s arched roofing system line, to keep water draining off correctly, will eventually start to puddle water, which is most likely time to buy a brand-new Swim Spa Cover! A Swim Spa Cover with threadbare spots in the vinyl is likewise problem, and although you can fend off the inescapable with a duct tape repair, the water will win, eventually.
• Not Removed Regularly. Eliminate your Swim Spa Cover weekly for 2 hours of airing out. A better Swim Spa Cover can endure longer durations, however it’s a good habit to get rid of the cover and let it get some air on a weekly basis. If you can quickly open the zipper to enable moisture to leave do so, but don’t remove fragile foam panels unless absolutely essential.
Actually, this is just hogwash The problem is the foam itself. It would be great if it were put into use in a totally dry setting. Unfortunately, swim spas by their very nature are filled with warm water. Warm water creates steam and steam rises up and gets into the cracks and crevises in the foam until it gets so heavy you can’t lift it anymore. The only way to avoid it is to never put it on the swim spa.
• Poorly Made. It’s simple to make a Swim Spa Cover with tape and staples, but it will not stop moisture extremely well. Even the very best foam filled Lightweight Swim Spa Covers with vacuum-wrapped and heat bonded seam are not going to keep the extreme wetness from your spa from reaching the foam core. The only genuine option is a Swim Spa Cover uses air to insulate rather than foam.
• Bad Spa Water. If the spa water is not maintained regularly with sanitizer and filtering, or is not stunned frequently enough, bacteria and algae can benefit from a congenial environment to flourish. Low pH, high chlorine or high ozone levels can likewise degrade the underside of your Swim Spa Cover cover. Due to the fact that the cover is so near the spa, it takes in the chemistry of the spa. Clean, clear and hygienic water is the very best environment to prevent foul-smelling spa covers. (Sorry but this is just BS) The fact is the spaces in the foam are almost laboratory conditions for growing mold and mildew. Your spa chemistry is not going to stop that.
• Not Cleaned/ Conditioned. For outdoor Lightweight Swim Spa Covers, unless your back deck is covered or your spa remains in a gazebo, you have sun, rain, pollen, dust, contamination, and animals to contend with. If you have a partial roofing system, that can be even worse than no roofing system at all, if an overhanging eave drains water onto the Swim Spa Cover Clean and condition a spa cover 2-4 times annually, so that it constantly looks great, and is secured from the components. Once again, this truly isn’t going to stop the mold and mildew from growing inside a foam cover However it will assist your spa dealer pay their expenses. If this were actually true a Swim Spa Cover inside would never get smelly and that just isn’t true.
Repair Your Swim Spa Cover!
• Remove to Safe Location: This primary step may appear obvious, but you require a good location to allow the cover to sit undisturbed from pets, wild animals, and winds. It should be a bright location if possible, or a dry indoor location with low humidity can also be utilized.
• Deodorize & Disinfect: You may not have to do both, it’s finest to be as gentle as possible. Do not use family cleaning products on your Swim Spa Cover, odd chemicals can wind up in your spa water. Gently clean all exterior surface areas with spa cover cleaner, and permit the panels to dry.
• Remove the Panels: Again, this must be prevented if possible, because the panels could become harmed throughout removal or cleaning. But if you determine that there is something slimy within, you can generally unzip and remove the panel for a cleansing inside and out.
How frequently does your spa dealership anticipate you to do all this? If your swim spa is safeguarded from many sun and rain, twice annually. If it’s visible it ought to be 3-4 times per year. Let that sink in a minute. Getting the foam panels in and out of the cover (something that was never designed to be done after it was initially constructed) will just cause it to rip apart or breakdown even faster.
Much better Choice
The most convenient cure for a foul-smelling Swim Spa Cover is to just buy a various sort of Swim Spa Cover A stinky swim spa cover simply indicates that your cover is handling moisture, and things are beginning to grow! Lightweight Swim Spa Covers from SpaCap.com that does not use foam but has actually sealed air chambers instead will avoid giving the mold and mildew a place to grow in the first place.